topic 7925 configuring IP in Wireless

7925 configuring IP

tinaausloos — Sun, 04 Jul 2021 06:58:24 GMT

Intermttently wireless phones go into configuring IP for no reason. may fix itself right away or it may take hours to come back online. Any ideas?

Thanks

Tina

migilles — Wed, 24 Apr 2013 21:27:54 GMT

Ensure you are using 792x firmware version 1.4.4.3.

If using a Cisco WLAN Controller, then I recommend to use one of the following versions:

7.0.240.0, 7.2.110.0, 7.3.101.0, 7.4.100.0

Otherwise, ensure there are no issues with the WLC/AP or network configuration.

If roaming across L2 boundaries, ensure L3 mobility is enabled or that the new L2 network is configured correctly.

If you still have issues, please open a case with TAC case for further troubleshooting.

abwahid — Thu, 26 Jun 2014 13:33:24 GMT

Hi,

For this kind of situation, it seems your access-point is rebooting, make sure your access-point is accurately powered and working OK.