topic Format FLASH Drive Problem in Wireless

Format FLASH Drive Problem

Ibrahim Talha Karababa — Sun, 04 Jul 2021 06:46:17 GMT

Hi everyone,

when i tried to clear config i formatted the FLASH drive accidentally in the Boot Loader Menu.

============================================================

Boot Loader Menu

============================================================

1. Run primary image (Image not found) - Active

2. Run backup image (Image not found)

3. Change active boot image

4. Clear configuration

5. Format FLASH Drive

6. Manually update images

with selecting 5. item and obviously wireless lan controller does not open properly. By the way it is a 5508

Could I fix this problem? How I am gonna fix this problem?

Format FLASH Drive Problem

Stephen Rodriguez — Thu, 21 Mar 2013 15:51:48 GMT

nope, you need to RMA the box

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Format FLASH Drive Problem

Ibrahim Talha Karababa — Thu, 21 Mar 2013 16:08:09 GMT

So what is the logic of designing a menu which pressing it end up with a RMA proccess as a consequence?

Format FLASH Drive Problem

Stephen Rodriguez — Thu, 21 Mar 2013 16:19:29 GMT

well normally with the WLC you don't interrupt the boot sequence when you want to clear the config.

You do it from inside the software itself, clear config command at the CLI.

With the WLC we do not have access to the underlying OS, like you would with a router or switch

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered