topic c1310 workgroup bridge sample configuration in Wireless

c1310 workgroup bridge sample configuration

steelhalcon — Sun, 04 Jul 2021 06:45:15 GMT

Can you please provide me with a sample configuration of c1310 as a workgroup bridge.

c1310 workgroup bridge sample configuration

Amjad Abdullah — Tue, 19 Mar 2013 11:11:48 GMT

Check this:

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_example09186a00805b9b87.shtml

it is easy though. Just configure same parameters as the root SSID (same security,same radio...etc). and put the station role as workgroup bridge.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

c1310 workgroup bridge sample configuration

Rasika Nayanajith — Tue, 19 Mar 2013 18:32:52 GMT

Hi Rommel,

Have a look at below post. This is very basic WGB configuration without adding security complexity. Once you undertand & configure this you should be able to add security on top of this as needed.

http://mrncciew.com/2013/01/18/workgroup-bridge-wgb-configurations/

HTH

Rasika