topic WLC - max of 10 units listed in Wireless

WLC - max of 10 units listed

Antonio Brandao — Sun, 04 Jul 2021 06:36:19 GMT

Hi all

I´m a bit newbie on cisco wireless world and I would like some assistance on that if possible

I´m using a Cisco Wireless Lan Controller SM-SRE-700-K9 nd I had installed for 2x 25 units license pack on this, what gives me 50 APs capacity.

Strange thing is, only 10 AP are appearing to me on list of APs connected in the WLC.

Any idea what could be the issue ?

Many Thanks

Antonio

WLC - max of 10 units listed

Antonio Brandao — Fri, 22 Feb 2013 21:15:59 GMT

Just to more information about

this Service module is installed in a CISCO2921

WLC - max of 10 units listed

Stephen Rodriguez — Fri, 22 Feb 2013 21:29:23 GMT

can you do a show license summary? make sure that it's showing 50 AP as the max count.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

WLC - max of 10 units listed

Antonio Brandao — Mon, 25 Feb 2013 13:18:36 GMT

Here is show license sum output

(Cisco Controller) >show license summary

License Store: Primary License Storage

StoreIndex: 0 Feature: base-ap-count Version: 1.0

License Type: Permanent

License State: Inactive

License Count: 25 / 0 (Active/In-use)

License Priority: Medium

License Store: Primary License Storage

StoreIndex: 1 Feature: base-ap-count Version: 1.0

License Type: Permanent

License State: Active, In Use

License Count: 50 /50 (Active/In-use)

License Priority: Medium

License Store: Evaluation License Storage

StoreIndex: 0 Feature: base-ap-count Version: 1.0

License Type: Evaluation

License State: Inactive

Evaluation total period: 8 weeks 4 days

Evaluation period left: 2 weeks 3 days

License Count: 10 / 0 (Active/In-use)

License Priority: Low

WLC - max of 10 units listed

Stephen Rodriguez — Mon, 25 Feb 2013 15:48:48 GMT

ok, so you are licensed for 50, just wanted to make sure it 'stuck'

Can you pick an AP that is not joining and capture

debug mac addr < mac of AP >

debug capwap events enable

debug capwap errors enable

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Re: WLC - max of 10 units listed

Darren Lynn — Wed, 27 Feb 2013 04:12:58 GMT

Question..

What version of code?
Which AP are trying to join?

Sent from Cisco Technical Support iPhone App

WLC - max of 10 units listed

Leo Laohoo — Wed, 27 Feb 2013 04:32:05 GMT

Please post the following output:

1. WLC: sh sysinfo;

2. AP: sh version;

3. AP: sh inventory;

4. AP: Reboot the AP and post the entire bootup process.

WLC - max of 10 units listed

Antonio Brandao — Mon, 04 Mar 2013 18:48:54 GMT

I did clean the APs and reconfigured one by one and it seems to be working now. So wasn´t an license issue