Multipl Trap Receivers

rchester — Sun, 04 Jul 2021 06:34:54 GMT

How can I add multiple trap receivers with the same community name from the 5508 CLI? Version 7.4

It can be done from the GUI but I woulld like to know if I am missing something.

Scott Fella — Thu, 21 Feb 2013 20:51:42 GMT

Its a trap receiver, so its the device that will receive the trap not the actual community string:

Table 7-8 SNMP Trap Receiver Summary Parameters
Parameter	Range
Community Name	Name of the server where the traps are sent.
IP Address	IP address of the server.
Status	Status that must be enabled for the SNMP traps to be sent to the server.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

topic Multipl Trap Receivers in Wireless