topic LAP - Bandwidth issue in Wireless

LAP - Bandwidth issue

Alexandre Vasseur — Sun, 04 Jul 2021 05:58:35 GMT

Hello everyone,

I would like to share with you a strange issue.

After a WLC upgrade (version 6 to 7), we noticed that the bandwidth had been reduced by twice.

The only workaround we found to restore the bandwidth is a reset of the LAP to factory default.

Does anyone have already seen something like that ?

Regards,

Re: LAP - Bandwidth issue

Scott Fella — Fri, 02 Nov 2012 11:00:56 GMT

What actual code did you upgrade to? Usually I would stick with the latest from each version.

Sent from Cisco Technical Support iPhone App

LAP - Bandwidth issue

Alexandre Vasseur — Fri, 02 Nov 2012 13:35:20 GMT

Upgrade from 6.0.199 to 7.0.230.

Re: LAP - Bandwidth issue

Scott Fella — Fri, 02 Nov 2012 13:45:53 GMT

Try 7.0.235.3

Sent from Cisco Technical Support iPhone App

LAP - Bandwidth issue

Alexandre Vasseur — Fri, 02 Nov 2012 13:50:48 GMT

Unfortunately I wasn't able to find any bug ID matching my issue fixed in 7.0.235.3.

Re: LAP - Bandwidth issue

Scott Fella — Fri, 02 Nov 2012 13:53:17 GMT

Is there a bug id for your issue now? I have never ran into the issue you are saying. How are you testing.

Sent from Cisco Technical Support iPhone App

LAP - Bandwidth issue

Alexandre Vasseur — Fri, 02 Nov 2012 13:58:24 GMT

- Is there a bug id for your issue now?

I don't think so.

- How are you testing?

Wtih ftp transfers (5 Mbps before reset to factory / 15 Mbps after reset to factory)

Re: LAP - Bandwidth issue

Scott Fella — Fri, 02 Nov 2012 14:02:36 GMT

You should open a TAC case and see if they have a bug id or maybe they will create one if they can reproduce it. Then follow up on your post if possible.

Sent from Cisco Technical Support iPhone App