topic Remote Configure in Wireless https://community.cisco.com/t5/wireless/remote-configure/m-p/2063587#M179890 <P>I have a 1231 high in a warehouse that needs converted to Autonomous mode.</P><P></P><P>Please tell me if this will work:</P><P></P><P>From the controller, revert the ap to a previous release not in LWAPP</P><P>Wait for AP to pull DHCP to GUI into, configure from there.</P><P></P><P>Is that the best way, short of getting a scissor lift to take it down to reconfigure it?</P> Sun, 04 Jul 2021 05:45:11 GMT waller.brad 2021-07-04T05:45:11Z Remote Configure https://community.cisco.com/t5/wireless/remote-configure/m-p/2063587#M179890 <P>I have a 1231 high in a warehouse that needs converted to Autonomous mode.</P><P></P><P>Please tell me if this will work:</P><P></P><P>From the controller, revert the ap to a previous release not in LWAPP</P><P>Wait for AP to pull DHCP to GUI into, configure from there.</P><P></P><P>Is that the best way, short of getting a scissor lift to take it down to reconfigure it?</P> Sun, 04 Jul 2021 05:45:11 GMT https://community.cisco.com/t5/wireless/remote-configure/m-p/2063587#M179890 waller.brad 2021-07-04T05:45:11Z Remote Configure https://community.cisco.com/t5/wireless/remote-configure/m-p/2063588#M179891 <HTML><HEAD></HEAD><BODY><P>That would work well.&nbsp; Otherwise you would need to get the AP into your hands to be able to convert it to IOS.</P><P></P><P></P><P>HTH, <BR />Steve <BR /> <BR />------------------------------------------------------------------------------------------------ <BR />Please remember to rate useful posts, and mark questions as answered</P></BODY></HTML> Tue, 02 Oct 2012 14:08:27 GMT https://community.cisco.com/t5/wireless/remote-configure/m-p/2063588#M179891 Stephen Rodriguez 2012-10-02T14:08:27Z