topic Re: Multiple Subnet Access via Aironet APs in Wireless

Multiple Subnet Access via Aironet APs

kdwillson — Sun, 04 Jul 2021 05:30:42 GMT

Does there exist a way to configure /allow a Cisco Aironet Access Point to provide wireless connectivity to two different subnets; 10.0.0.0 and 172.0.0.0.

A WCS / WLAC is used & VLANs are used too. I knowlll that switching between subnets/VLANs a router is required.

Thank you!

Keith

Re: Multiple Subnet Access via Aironet APs

Amjad Abdullah — Thu, 09 Aug 2012 18:27:50 GMT

Yes you can.

https://supportforums.cisco.com/docs/DOC-14496

You need routing if you want different subnets tot alk to each other.

Re: Multiple Subnet Access via Aironet APs

kdwillson — Fri, 10 Aug 2012 01:53:45 GMT

how will mobile devices & laptops be granted to one or the other subnet?

Re: Multiple Subnet Access via Aironet APs

kdwillson — Fri, 10 Aug 2012 02:19:16 GMT

the above question involves mobile devices & laptops. "& amp" is a typo. Sorry for the confusion.

I need to find a solution to provide: wifi access to two subnets for mobile devices. these two subnets will be assigned to SAME VLAN#.

Is that possible...?

Thanks!

Keith

Re: Multiple Subnet Access via Aironet APs

fbarboza — Fri, 10 Aug 2012 02:37:23 GMT

When working with vlans we will e linking each ssid to a specific subnet, each vlan to a subnet and each subnte to an specific ssid.

Then on the layer 3 device you configure the required layer 3 routing .

Sent from Cisco Technical Support iPhone App

Re: Multiple Subnet Access via Aironet APs

fbarboza — Fri, 10 Aug 2012 02:41:55 GMT

Also you can check on link.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805e7a24.shtml

Sent from Cisco Technical Support iPhone App