topic OfficeExtend with 1131 in Wireless

OfficeExtend with 1131

shathaway — Sun, 04 Jul 2021 03:53:33 GMT

Hello,

We have a 5508 running 7.x code, and I am trying to get an 1131 working as an OfficeExtend AP. It appears to be a supported AP, I have configured the controller as much as possible from the minimal documentation on the subject. I have made the hole in my firewall for the appropriate ports, put the external address in the NAT field on the AP configuration, etc.

However, when I take the AP out in the field, it does not even appear to try to make a connection to this external address. Boots up, looks for CAPWAP DNS entries, then eventually times out and goes into "standalone mode"

Am I missing something?

Thanks in advance.

OfficeExtend with 1131

Leo Laohoo — Sat, 08 Oct 2011 03:20:18 GMT

Which firmware code are you talking about?

http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_lwap.html#wp1502346

OfficeExtend with 1131

George Stefanick — Sat, 08 Oct 2011 14:03:56 GMT

Do you configure the 1131 as HREAP ?

OfficeExtend with 1131

shathaway — Sat, 08 Oct 2011 18:16:51 GMT

Yes, configured as Hreap. Some docs mention a sub-mode, but nothing available on this AP.

OfficeExtend with 1131

shathaway — Sat, 08 Oct 2011 18:20:04 GMT

This is the info on the AP:

Remote-AP01>sh ver

Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA2, RELEASE

SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 13-Apr-11 12:58 by prod_rel_team

ROM: Bootstrap program is C1130 boot loader

BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (

fc2)

Remote-AP01 uptime is 1 minute

System returned to ROM by power-on

System image file is "flash:/c1130-k9w8-mx.124-23c.JA2/c1130-k9w8-mx.124-23c.JA2

The controller code is

7.0.116.0

OfficeExtend with 1131

George Stefanick — Sat, 08 Oct 2011 18:23:25 GMT

I assume you joined the AP prior to deplyment to deployment?

You are allowing 5246 and 5247 from the internet through the FW to the DMZ anchor?

Can you ping your DMZ WLC ip adderess?

If you check your DMZ WLC you will see on the logs if its trying to join, do you see anything? ..if its not then you need to check the ap that it was primed properly AND that the DMZ can indeed reach the internet.

Re: OfficeExtend with 1131

sungy — Wed, 08 Nov 2017 22:53:28 GMT