topic DHCP option 60 & 43 on Cisco IOS to an ArubaAP in Wireless

DHCP option 60 & 43 on Cisco IOS to an ArubaAP

olavarr69 — Sun, 04 Jul 2021 03:52:29 GMT

Hi,

I'm looking for help on the syntax to configure option 60 and 43 on a Cisco Router DHCP pool for Option 60 and 43 so that an aruba Networks AP "ArubaAP" can discover it's master controller? Please any help?

DHCP option 60 & 43 on Cisco IOS to an ArubaAP

Kayle Miller — Wed, 05 Oct 2011 16:50:13 GMT

Angel,

My best guess would be add the following two lines to your DHCP pool on the Cisco IOS Device

option 60 ascii "ArubaAP"

option 43 ascii "IP address of controller"

HTH

DHCP option 60 & 43 on Cisco IOS to an ArubaAP

stefan.angerer — Wed, 05 Oct 2011 17:16:33 GMT

Hi,

I know that this config is working:

ip dhcp pool yournet

network 10.11.12.0 255.255.255.0

default-router 10.11.12.1

option 60 ascii "ArubaAP"

option 43 ip 7.8.9.10

Regards

Stefan

Re: DHCP option 60 & 43 on Cisco IOS to an ArubaAP

Kayle Miller — Wed, 05 Oct 2011 17:33:30 GMT

the option 43 ip x.x.x.x is also valid and like Stefan said should work..

if these posts were helpful please rate them.