topic Re: clinet speed rate in Wireless

clinet speed rate

mohammad abdul jawad — Sun, 04 Jul 2021 03:12:28 GMT

i have two cisco wlc and cisco ap 1130

when the client connect to ssid , he shown the speed rate 54 Mbps and become 48 mbps or 20mbps and 10 and become 54mbps

the speed not stable .

how can solve this problem .

Re: clinet speed rate

Nicolas Darchis — Sat, 14 May 2011 16:37:48 GMT

This is probably because there are a lot of retransmissions. Try to understand why there are a lot of retarnsmissions :

too dense environment (too many clients), too many interferers, too many rogues ...

Re: clinet speed rate

mohammad abdul jawad — Sat, 21 May 2011 09:47:31 GMT

i show this error in WLC

AP does not have any resources for client to connect.(Max clients on the AP on the Radio) .

also i have two radius servers one steel belt radius and other ACS

the steel belt radius is integrated with active directory and assoicated to ssid user

and the other ACS not integrated with active directory and associated to ssid client

there is any problem if the port number for both server have the same port number 1812 in configuration

Re: clinet speed rate

Nicolas Darchis — Sat, 21 May 2011 10:59:59 GMT

On the WLC : Monitor->client, check how many clients are associated to that AP.

The radius is not the problem.

Re: clinet speed rate

mohammad abdul jawad — Sun, 22 May 2011 11:05:00 GMT

i checked the number of user is normal 9

The problem is still ongoing

Re: clinet speed rate

Leo Laohoo — Sun, 22 May 2011 22:32:46 GMT

Upgrade the firmware of the client and observe.

How far is the client from the AP?

Re: clinet speed rate

mohammad abdul jawad — Mon, 23 May 2011 08:00:53 GMT

The problem occurs in all regions of AP
And tried to use different devices have different operating system ( like windows xp and windows 7 ) but the problem appears.

also the other ssid have the same problems