https://community.cisco.com/t5/wireless/wap4410n-more-problems/m-p/1582879#M183250 <P>I have a pair of new WAP4410N and they seem to be suffering from the problem others have reported with loosing connectivity after about a day. I have upgraded to the latest firmware (2.0.3.3) but it is still happening.&nbsp; In addition, the web interface does not accurately reflect the configuration - It was working OK but now it show defaults values such as region Asia instead of the correct value and does not allow these to be changed. Using SSH shows the expected configuration and this is working with a daily restart.&nbsp; The same thing is happening on both access points. Anyone else having problems with the web interface?</P> Sun, 04 Jul 2021 02:38:51 GMT mbuglass1 2021-07-04T02:38:51Z https://community.cisco.com/t5/wireless/wap4410n-more-problems/m-p/1582879#M183250 <P>I have a pair of new WAP4410N and they seem to be suffering from the problem others have reported with loosing connectivity after about a day. I have upgraded to the latest firmware (2.0.3.3) but it is still happening.&nbsp; In addition, the web interface does not accurately reflect the configuration - It was working OK but now it show defaults values such as region Asia instead of the correct value and does not allow these to be changed. Using SSH shows the expected configuration and this is working with a daily restart.&nbsp; The same thing is happening on both access points. Anyone else having problems with the web interface?</P> Sun, 04 Jul 2021 02:38:51 GMT https://community.cisco.com/t5/wireless/wap4410n-more-problems/m-p/1582879#M183250 mbuglass1 2021-07-04T02:38:51Z