topic Re: Incorrect power injector in Wireless

Incorrect power injector

Javier Zamora — Sun, 04 Jul 2021 02:37:17 GMT

I have purchased several AIR-LAP1242AG-E-K9 but had no POE switches so I needed power injectors; we ended up purchasing AIR-PWRINJ-FIB without noticing that they were also media converters.

Is there any converter I can use to convert back to copper? I wanted to confirm this before getting to the inevitable conclusion that we need to exchange them for the AIR-PWRINJ3

Re: Incorrect power injector

Federico Ziliotto — Wed, 05 Jan 2011 10:03:18 GMT

Hi Javier,

You may want to take a look at the following media converter:

http://www.cisco.com/en/US/prod/collateral/video/ps8806/ps8900/ps8901/product_data_sheet0900aecd806c4982.pdf

Hope this helps,

Fede

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Re: Incorrect power injector

Javier Zamora — Wed, 05 Jan 2011 13:06:01 GMT

Thank you very much for the prompt response. I will be sure to read up on this converter.

Re: Incorrect power injector

Federico Ziliotto — Wed, 05 Jan 2011 13:10:24 GMT

Thank you Javier, glad this can be useful 😉

Feel free to ping us back in the future in case any further assistance would be needed with your wireless setup.

Regards,

Fede

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.