Probably error in flash WLCM

Milton Tizoc — Sun, 04 Jul 2021 02:19:07 GMT

My WLCM does not boot, it shows this:

Initializing memory. Please wait.
256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...

Booting from disk..., please wait.

Embedded BIOS Debugger Single Step Trap
EAX = FFF0FBA4 CS:EIP = 1FDA:00000003 EFL = 00001682 NG nz .. na .. po .. nc
EBX = 756E7C00 SS:ESP = 1FDA:00001FDC EBP = 00001FDA .. nt IOPL1 nv DN EI ..
ECX = 0000B600 DS:ESI = 9F40:00035554 FS = 1AC4 .. .. id vp vi al vm rf
EDX = 0000AA80 ES:EDI = 5A49:00005240 GS = 0000
1FDA:00000003 xor ax, 5432

EB43DBG:

In the Flash card i can see only the .AES file (WLC software) and the boot (boot file). In some document i can see that it need also the linux kernel, i suspect that that file is missed from my flash, can some body has an NM-AIR-WLC6-K9 that could send me the linux kernel of this WLC.

Thanks in advanced.

Regards,

Milton Tizoc.

Re: Probably error in flash WLCM

Serge Yasmine — Wed, 27 Oct 2010 20:11:23 GMT

Hi Milton, do you have the possibility to open a TAC case and request and RMA?

Thanks

Serge

Re: Probably error in flash WLCM

Milton Tizoc — Fri, 29 Oct 2010 00:12:13 GMT

Hi Serge,

no right now, but i think it'll be necesary.

Regards

Re: Probably error in flash WLCM

Serge Yasmine — Tue, 02 Nov 2010 22:49:06 GMT

ok 🙂

topic Probably error in flash WLCM in Wireless

Probably error in flash WLCM

Re: Probably error in flash WLCM

Re: Probably error in flash WLCM

Re: Probably error in flash WLCM