topic Re: 1252 LAP. in Wireless

1252 LAP.

aritacco37 — Sun, 04 Jul 2021 02:15:16 GMT

I Have a 1252 LAP that immediately gives me 3 solid red lights on the top when I give it power. Is this a dead board. I cant find info on the 3 red lights anywhere. I called Cisco but it is out of warranty and they would not even tell me what the 3 red lights mean.

Thanks,

Re: 1252 LAP.

Leo Laohoo — Tue, 05 Oct 2010 21:57:01 GMT

3 red lights? Sounds like it's dead. Can you try to remove the radio modules and see if you get the same result? Have you tried to console into the AP and find out what is the output?

Re: 1252 LAP.

aritacco37 — Wed, 06 Oct 2010 11:59:55 GMT

Yes I have tried all the above. I see nothing when I console it, and have tried radios from other ap's. Also tried no radios.

It has to be dead, but I was just curious because I see nothing on 3 red light anyware in the forums.

Thanks,

Re: 1252 LAP.

Surendra BG — Wed, 06 Oct 2010 12:48:31 GMT

Hi Leo / Aritac..

if Ethernet / Radio / Status LED are RED then it means.. the AP is facing some Boot loader errors and its the issue with the DRAM Memory test failure experienced by the AP.

let me know if the above answered your question..

Regards

Surendra

Re: 1252 LAP.

aritacco37 — Wed, 06 Oct 2010 12:57:39 GMT

So can I fix it? Or is it dead?

Re: 1252 LAP.

Surendra BG — Wed, 06 Oct 2010 13:04:37 GMT

Its dead.. we normaly replace the device if its under warranty or associated with any contract...

Regards

Surendra

Re: 1252 LAP.

aritacco37 — Wed, 06 Oct 2010 13:05:39 GMT

Thank you so much for the info.

Love the Cisco Forums......

Re: 1252 LAP.

Surendra BG — Wed, 06 Oct 2010 13:07:57 GMT

its our pleasure to help you.. Thank you for using the support forum!!

Regards

Surendra