topic 7925G send / dial button in Wireless

7925G send / dial button

codeangels — Sun, 04 Jul 2021 01:49:22 GMT

Hi,

This is a really simple question but I cannot seem to find a solution:

On a 7925G, when I dial a number using digits and then push "Send" (Green) button, nothing happens. Also if I choose "Dial" from Actions, nothing happens. On another hand, if I push "Send" button first, I hear dialtone and can dial.

This is a UC500 with CME 8, Phone FW is 1.3.3

The nearest I came to defining send key "action" was a

service phone sendKeyAction

command, but the described behaviour does not change, does not matter if it is set to 0 or 1.

Any ideas how to fix this?

Thanks!

Re: 7925G send / dial button

xyzjames — Thu, 02 Sep 2010 21:14:33 GMT

Delete the ephone-dn-template will solve this problem.

7925G send / dial button

ryanbevan — Fri, 05 Jul 2013 08:11:02 GMT

Hi,

I had the same problem and i resolved it by recreating the cnf-files under the telephone-serivce .

#conf t

(config)#telephony-service

(config-telephony)#create cnf-files

Hope this works for you .

Thanks,

Ryan

7925G send / dial button

mmangat — Wed, 10 Jul 2013 06:26:20 GMT

Hello,

Please find below a short Cisco doc that illustrates 7925G calling functions. Hope this helps resolve your problem:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g_7925gEX_7926/8_0_1/english/user_guide/P256_BK_EBE22FA_00_wireless-ip-phones-user-guide_chapter_011.html