topic Radius server is not available in Wireless

Radius server is not available

blhowell70 — Sat, 03 Jul 2021 21:33:16 GMT

I am seeing the following fault on my WLSE express: Radius server is not available

The following is what I see in the AAA-server-trace.log:

08/27/2007 20:15:23: P15467: Packet received from 192.168.50.4

08/27/2007 20:15:23: P15467: Checking Message-Authenticator

08/27/2007 20:15:23: Log: Request from 192.168.50.4: Message-Authenticator validation failed

What is causing this Fault?

Re: Radius server is not available

jreekers — Tue, 28 Aug 2007 15:12:30 GMT

Hi. It's likely that the "shared secret" or some other attribute isn't matching in your WLSE/ACS. In the troubleshooting guide, it mentions some of the things to look for:

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/prod_troubleshooting_guide_chapter09186a0080363faa.html#wp1029186

of course, all of the settings for AAA authentication are found in the User Guide here:

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_user_guide_chapter09186a008052dbfd.html

But definitely the Message-Authenticator

check will fail if the shared secret is wrong, so that's probably where you want to look first.

-Joe

Re: Radius server is not available

Jagdeep Gambhir — Tue, 28 Aug 2007 15:16:18 GMT

Make sure shared secret key is correct. Please type is again and do not copy paste.

Re: Radius server is not available

blhowell70 — Tue, 28 Aug 2007 16:13:42 GMT

I should have mentioned that I can authenticate with leap using my wirless client.

I also double checked the shared secret and it is correct.