topic Re: displaying errors on 1410 coax cable in Wireless https://community.cisco.com/t5/wireless/displaying-errors-on-1410-coax-cable/m-p/1345777#M185455 <HTML><HEAD></HEAD><BODY><P>ahh, thanx --sk</P></BODY></HTML> Wed, 15 Jul 2009 19:40:15 GMT STUART KENDRICK 2009-07-15T19:40:15Z displaying errors on 1410 coax cable https://community.cisco.com/t5/wireless/displaying-errors-on-1410-coax-cable/m-p/1345775#M185453 <P>Is there a way to display counters -- including physical layer errors -- on the dual RG-6 cable linking the AP to its power injector?</P><P></P><P>Seems to me that 'sh int' displays counters for the dot11Radio0 interface (in the AP) and for the FastEthernet0 interface (the RJ-45 in the power injector) ... but I don't see anything corresponding to an interface to the coax cable running between the two. [BTW: does anyone know what protocol runs over the coax? Ethernet-over-shielded-RG, I suppose ... does this have a specific name?)</P><P></P><P>I believe that my coax has been damaged (water penetration), and I'm looking for a way to quantify physical layer problems with transmission over it.</P><P></P><P>--sk</P><P></P><P>Stuart Kendrick</P><P>FHCRC</P><P>Seattle, WA</P><P></P> Sun, 04 Jul 2021 00:49:43 GMT https://community.cisco.com/t5/wireless/displaying-errors-on-1410-coax-cable/m-p/1345775#M185453 STUART KENDRICK 2021-07-04T00:49:43Z Re: displaying errors on 1410 coax cable https://community.cisco.com/t5/wireless/displaying-errors-on-1410-coax-cable/m-p/1345776#M185454 <HTML><HEAD></HEAD><BODY><P>You could use the "show power-injector" command to look at the stats.</P></BODY></HTML> Wed, 15 Jul 2009 17:57:18 GMT https://community.cisco.com/t5/wireless/displaying-errors-on-1410-coax-cable/m-p/1345776#M185454 dancampb 2009-07-15T17:57:18Z Re: displaying errors on 1410 coax cable https://community.cisco.com/t5/wireless/displaying-errors-on-1410-coax-cable/m-p/1345777#M185455 <HTML><HEAD></HEAD><BODY><P>ahh, thanx --sk</P></BODY></HTML> Wed, 15 Jul 2009 19:40:15 GMT https://community.cisco.com/t5/wireless/displaying-errors-on-1410-coax-cable/m-p/1345777#M185455 STUART KENDRICK 2009-07-15T19:40:15Z