topic Re: 1141N configuration in Wireless

1141N configuration

talmakdi — Sun, 04 Jul 2021 00:33:08 GMT

Please, I need the step by step configuration guide for the AP1141N-E-K9. Thank you.

Re: 1141N configuration

gamccall — Wed, 06 May 2009 13:18:16 GMT

http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/Controller52CG.html

Re: 1141N configuration

talmakdi — Wed, 06 May 2009 13:38:48 GMT

Thank you for your quick reply,

however, this is configuration guide for the 4400 controller.

Please check my previous request for configuring the STANDALONE 1141N access point.

Thanks,

Re: 1141N configuration

gamccall — Wed, 06 May 2009 13:52:28 GMT

There is no standalone 1141N access point. This AP is only available with lightweight code at this time.

If you've been provided with a beta test version of an IOS 1140, you should be able to acquire the beta documentation through the same channel.

Re: 1141N configuration

talmakdi — Wed, 06 May 2009 13:58:56 GMT

Thanks for your reply, it was a pre-release sample I was provided. I am pretty sure it is a STANDALONE version. but checking the datasheet now, I noticed that there is no Standalone version of this AP. I will check with the BU for that.

Re: 1141N configuration

Leo Laohoo — Wed, 06 May 2009 21:11:13 GMT

Unless you have the pre-release version of the Autonomous IOS for the LAP1140, we can't help you. The only IOS for the 1140 is the LWAP version and I don't know when Cisco will release the aIOS for the 1140 AP.

Another option is to look at the Configuration Guide for the 1130 and/or 1250 to assist your requirements.