Interface Dot11Radio0, failed - cmd busy -Traceback.....

sqrbncisco — Sun, 04 Jul 2021 00:22:59 GMT

hi everyone,

please help me,

i have a problem with cisco autonomous:

Product/Model Number: AIR-AP1131AG-E-K9 System Software Filename: c1130-k9w7-tar.124-10b.JA System Software Version: 12.4(10b)JA Bootloader Version: 12.3(8)JEA

the problem is that my autonomous cisco AP sometimes crash and the only way to overcome this is to reset the AP...

i found the log --> "Interface Dot11Radio0, failed - cmd busy -Traceback= 0x5DBF8 0x4EDE70 0x4EDDD4 0x797684 0x7978E4 0x79BD64 0x4ECEC8 0x4ED2D0 0x4ED684 0x198850"

any comment on this problem....

please advice....

thanks

Re: Interface Dot11Radio0, failed - cmd busy -Traceback.....

Leo Laohoo — Mon, 30 Mar 2009 09:45:07 GMT

In enable mode, can you do a "dir flash:" and post the contents?

Do a "show ip interface brief" and make sure your radios are still up/up.

topic Interface Dot11Radio0, failed - cmd busy -Traceback..... in Wireless

Interface Dot11Radio0, failed - cmd busy -Traceback.....

Re: Interface Dot11Radio0, failed - cmd busy -Traceback.....