521

ricardorojas123 — Sat, 03 Jul 2021 23:29:05 GMT

I have the access point 521 express access point with LWAPP, and would like upgrade from Lightweight Mode to Autonomous ? I can do this in this model?

Re: 521

Rob Huffman — Mon, 15 Sep 2008 18:30:02 GMT

Hi Ricardo,

This is a "one way" conversion only;

Autonomous to LWAPP (Yes)

LWAPP to Autonomous (No)

Converting an Autonomous AP521 Using the CCA

When an autonomous AP521 access point is converted to controller-mode operation using the CCA, the access point properties screen continues to indicate that the access point is an AIR-AP521G-A-K9 after the conversion. This is in agreement with the product label on the access point. However, the CCA displays a small triangle icon next to the converted access point to indicate that the access point is now operating as a controller-mode access point.

--------------------------------------------------------------------------------

Note The CCA conversion process is one-way. Once the conversion takes place, you cannot restore the access point to autonomous operation.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/c526rn42614.html#wp245163

Hope this helps!

Rob

topic 521 in Wireless

521

Re: 521