topic Re: DHCP Pool assignment from AP1232 in Wireless https://community.cisco.com/t5/wireless/dhcp-pool-assignment-from-ap1232/m-p/1001751#M188381 <HTML><HEAD></HEAD><BODY><P>The 1232 cannot be used as a router. So it cannot NAT by itself...</P><P>Hope it answers your question.</P><P>Jerome</P></BODY></HTML> Thu, 05 Jun 2008 19:12:54 GMT jeromehenry_2 2008-06-05T19:12:54Z DHCP Pool assignment from AP1232 https://community.cisco.com/t5/wireless/dhcp-pool-assignment-from-ap1232/m-p/1001750#M188380 <P>Is there any way to have an AP1232 acting as a bridge, configured to use NAT and distribute a private IP address range to clients, instead of doing a "pass through" to be assigned a DHCP address from the MS DHCP server?</P><P></P><P>Thanks.</P> Sat, 03 Jul 2021 22:59:20 GMT https://community.cisco.com/t5/wireless/dhcp-pool-assignment-from-ap1232/m-p/1001750#M188380 jlinkowsky 2021-07-03T22:59:20Z Re: DHCP Pool assignment from AP1232 https://community.cisco.com/t5/wireless/dhcp-pool-assignment-from-ap1232/m-p/1001751#M188381 <HTML><HEAD></HEAD><BODY><P>The 1232 cannot be used as a router. So it cannot NAT by itself...</P><P>Hope it answers your question.</P><P>Jerome</P></BODY></HTML> Thu, 05 Jun 2008 19:12:54 GMT https://community.cisco.com/t5/wireless/dhcp-pool-assignment-from-ap1232/m-p/1001751#M188381 jeromehenry_2 2008-06-05T19:12:54Z Re: DHCP Pool assignment from AP1232 https://community.cisco.com/t5/wireless/dhcp-pool-assignment-from-ap1232/m-p/1001752#M188383 <HTML><HEAD></HEAD><BODY><P>Thank you. Which, if any, AP's can do this natively?</P><P></P><P>Thanks again!</P></BODY></HTML> Thu, 05 Jun 2008 20:05:22 GMT https://community.cisco.com/t5/wireless/dhcp-pool-assignment-from-ap1232/m-p/1001752#M188383 jlinkowsky 2008-06-05T20:05:22Z