Optimizing 1351 bridges for voice traffic

bdunsing2 — Sat, 03 Jul 2021 22:28:35 GMT

Are there any "best practices" or recommended settings for optimizing voice traffic across a 1351 wireless bridge set? The 2 bridges are approx 200 feet from each other, no obstructions. Link tests from within the IOS show 1% retries and 54MB speed. However - 7920's at the remote location reboot (phones re-register) at least 4 times per day.

I have the bridge configured for Best Throughput. Should I disable to the lower data rates, since the APs are so close and unlikely to need them? That would decrease my "wireless ring" size and prevent interference from weaker signals.

Are there any settings (preamble, packet size, etc.) I should be tweaking in the 1351 settings to optimize voice traffic?

Any help will be appreciated.

Thank you -

Re: Optimizing 1351 bridges for voice traffic

bbaley — Thu, 06 Mar 2008 22:37:55 GMT

You can check this guide for more information on designing Vocie over WLAN:

http://cisco.com/en/US/solutions/collateral/ns340/ns394/ns348/net_implementation_white_paper0900aecd804f1a46.html

topic Optimizing 1351 bridges for voice traffic in Wireless

Optimizing 1351 bridges for voice traffic

Re: Optimizing 1351 bridges for voice traffic