topic Re: 1410 bridge in Wireless https://community.cisco.com/t5/wireless/1410-bridge/m-p/915027#M189026 <HTML><HEAD></HEAD><BODY><P>Load the recovery image 12.3.7JA or higher into the bridge. Use the command bridge#dot11 dot11Radio 0 recovery-fw flash:c1410-k9w7-mx.123-7.JA/6501.img to use the recovery image. Now upgrade the required image. </P></BODY></HTML> Thu, 14 Feb 2008 15:10:37 GMT ivillegas 2008-02-14T15:10:37Z 1410 bridge https://community.cisco.com/t5/wireless/1410-bridge/m-p/915026#M189025 <P>I have two 1410 bridges, one configured as root and the other as non-root. I upgraded the root bridge and lost communication with the non-root. I tried to upgrade the non-root and I get a polling window that pops up and gives the status as IDLE restart complete. It will not upgrade. Any ideas?</P> Sat, 03 Jul 2021 22:21:22 GMT https://community.cisco.com/t5/wireless/1410-bridge/m-p/915026#M189025 susansands 2021-07-03T22:21:22Z Re: 1410 bridge https://community.cisco.com/t5/wireless/1410-bridge/m-p/915027#M189026 <HTML><HEAD></HEAD><BODY><P>Load the recovery image 12.3.7JA or higher into the bridge. Use the command bridge#dot11 dot11Radio 0 recovery-fw flash:c1410-k9w7-mx.123-7.JA/6501.img to use the recovery image. Now upgrade the required image. </P></BODY></HTML> Thu, 14 Feb 2008 15:10:37 GMT https://community.cisco.com/t5/wireless/1410-bridge/m-p/915027#M189026 ivillegas 2008-02-14T15:10:37Z