cannot associate: No matching privacy setting

msaulnier — Sat, 03 Jul 2021 21:37:38 GMT

I am trying to create a wireless bridge with 2 1200 AP.

The "Client" is giving me this error message:

Interface Dot11Radio0, cannot associate: No matching privacy setting (from 001b.d5c8.ce80)

This is the master config:

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

hostname Bclap-ad01

enable secret xxx

ip subnet-zero

aaa new-model

aaa group server radius rad_eap

server 172.30.103.178 auth-port 1812 acct-port 1813

aaa group server radius rad_mac

aaa group server radius rad_acct

aaa group server radius rad_admin

aaa group server tacacs+ tac_admin

aaa group server radius rad_pmip

aaa group server radius dummy

aaa authentication login eap_methods group rad_eap

aaa authentication login mac_methods local

aaa authorization exec default local

aaa accounting network acct_methods start-stop group rad_acct

aaa session-id common

dot11 ssid Wireless-Bridge

authentication open

dot11 network-map

username Cisco password xxx

bridge irb

interface Dot11Radio0

description 802.11G Radio

no ip address

no ip route-cache

ssid Wireless-Bridge

speed basic-1.0 basic-2.0 basic-5.5 basic-11.0

station-role root access-point

rts threshold 2312

antenna receive right

antenna transmit right

antenna gain 14

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

interface Dot11Radio1

no ip address

no ip route-cache

shutdown

speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0

station-role non-root

bridge-group 1

bridge-group 1 spanning-disabled

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

bridge-group 1

bridge-group 1 spanning-disabled

interface BVI1

ip address 172.30.103.178 255.255.0.0

no ip route-cache

ip default-gateway 172.30.4.70

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

ip radius source-interface BVI1

radius-server local

nas 172.30.103.178 key xxx

user Chapais-AP nthash xxx

radius-server attribute 32 include-in-access-req format %h

radius-server host 172.30.103.178 auth-port 1812 acct-port 1813 key xxx

radius-server vsa send accounting

control-plane

bridge 1 route ip

line con 0

line vty 0 4

end

This is the client config:

Can you help me find the error in my setup ?

Re: cannot associate: No matching privacy setting

irisrios — Thu, 20 Sep 2007 18:03:35 GMT

This has to do with mismathced encryption setting on the client and access point. Make sure encryption setting match. Refer URL

http://cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43auth.html#wp1035522

topic cannot associate: No matching privacy setting in Wireless

cannot associate: No matching privacy setting

Re: cannot associate: No matching privacy setting