topic Hello in Wireless

WEP Authentication

rajithahettiarachchi — Mon, 05 Jul 2021 11:36:39 GMT

I have two SSIDs created in my cisco 1040 AP.

GUEST - VLAN 12

WPA2 with pre shared key

VLAN 12 with ciper AES CCMP

OFFICE - VLAN 1

WPA2 with pre shared key

VLAN 1 with ciper AES CCMP

But when I tried to create another SSID (Voice SSID for cisco 7926 IP Phones)with

VLAN 13 with WEP authentication, it is not allowing to create VOICE SSID. Is there are any way to configure SSID with WEP authentication in cisco 1040 Access Point?

Regards,

Rajitha

OS - Version 12.4(23c)JA3

rajithahettiarachchi — Fri, 12 Feb 2016 12:49:30 GMT

OS - Version 12.4(23c)JA3

AP - cisco AIR-AP1041N-A-K9

Wep is so easy to break why

George Stefanick — Sat, 13 Feb 2016 17:28:39 GMT

Wep is so easy to break why would you even consider using it when WPA2 is simplest to use?

Refer the link : http://www

mohanak — Mon, 15 Feb 2016 08:59:22 GMT

Refer the link : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap10-cipherwep.html#pgfId-1036363

Hi,

rajithahettiarachchi — Mon, 15 Feb 2016 09:07:38 GMT

Hi,

Cisco 7926G phone doesn't support WPA2.

Thanks..!

rajithahettiarachchi — Mon, 15 Feb 2016 09:08:07 GMT

Thanks..!

Hello

George Stefanick — Mon, 15 Feb 2016 13:14:16 GMT

Hello

the 7926 does indeed support wpa2 psk. http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf