topic Re: wireless ip phone in Wireless https://community.cisco.com/t5/wireless/wireless-ip-phone/m-p/746126#M190308 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I got the same problem. I was trying to use the Lynksis WIP330 IP phone on a AP1240AG. The AP diffuse two ssid, an open and a secure. The Secure uses a radius server (EAP - WAP2). </P><P></P><P>The ip phone sees only the Open SSID :s. I don't understand why because a Siemens Ip Phone can see the Secure ssid :'(</P><P></P><P>Could someone give help ?</P></BODY></HTML> Fri, 29 Jun 2007 11:54:49 GMT Flitzouille 2007-06-29T11:54:49Z wireless ip phone https://community.cisco.com/t5/wireless/wireless-ip-phone/m-p/746124#M190306 <P>please can you tell me how can i configure controller to support wireless ip phone and why phone not detected the SSID or any signal from the AP</P> Sat, 03 Jul 2021 21:05:27 GMT https://community.cisco.com/t5/wireless/wireless-ip-phone/m-p/746124#M190306 ahmedalshami 2021-07-03T21:05:27Z Re: wireless ip phone https://community.cisco.com/t5/wireless/wireless-ip-phone/m-p/746125#M190307 <HTML><HEAD></HEAD><BODY><P>Which phone are you using?</P><P>For 7920/7921, can refer to the 7921 admin guide @ <A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/wip7921/" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/wip7921/</A></P><P></P><P>Also deployment guide @ <A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/wip7921/7921dply.pdf" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/wip7921/7921dply.pdf</A>.</P><P></P><P>Also WLAN SRND @ <A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/solution/emblty30.pdf" target="_blank">http://www.cisco.com/univercd/cc/td/doc/solution/emblty30.pdf</A>.</P></BODY></HTML> Fri, 18 May 2007 20:06:57 GMT https://community.cisco.com/t5/wireless/wireless-ip-phone/m-p/746125#M190307 migilles 2007-05-18T20:06:57Z Re: wireless ip phone https://community.cisco.com/t5/wireless/wireless-ip-phone/m-p/746126#M190308 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I got the same problem. I was trying to use the Lynksis WIP330 IP phone on a AP1240AG. The AP diffuse two ssid, an open and a secure. The Secure uses a radius server (EAP - WAP2). </P><P></P><P>The ip phone sees only the Open SSID :s. I don't understand why because a Siemens Ip Phone can see the Secure ssid :'(</P><P></P><P>Could someone give help ?</P></BODY></HTML> Fri, 29 Jun 2007 11:54:49 GMT https://community.cisco.com/t5/wireless/wireless-ip-phone/m-p/746126#M190308 Flitzouille 2007-06-29T11:54:49Z