topic Input errors on FastEthernet, 1300 bridge in Wireless https://community.cisco.com/t5/wireless/input-errors-on-fastethernet-1300-bridge/m-p/728578#M190390 <P>I'm getting a lot of input/crc errors on the eth int for a 1300 bridge. I originally suspected a bad power injector/eth port, replaced it and I'm still receiving errors. This bridge never posed a problem before, so I doubt it is a bad cable run. There were also a lot of interface resets, line protocol up/downs before the inj replacement.</P> Sat, 03 Jul 2021 21:00:25 GMT kc 2021-07-03T21:00:25Z Input errors on FastEthernet, 1300 bridge https://community.cisco.com/t5/wireless/input-errors-on-fastethernet-1300-bridge/m-p/728578#M190390 <P>I'm getting a lot of input/crc errors on the eth int for a 1300 bridge. I originally suspected a bad power injector/eth port, replaced it and I'm still receiving errors. This bridge never posed a problem before, so I doubt it is a bad cable run. There were also a lot of interface resets, line protocol up/downs before the inj replacement.</P> Sat, 03 Jul 2021 21:00:25 GMT https://community.cisco.com/t5/wireless/input-errors-on-fastethernet-1300-bridge/m-p/728578#M190390 kc 2021-07-03T21:00:25Z Re: Input errors on FastEthernet, 1300 bridge https://community.cisco.com/t5/wireless/input-errors-on-fastethernet-1300-bridge/m-p/728579#M190391 <HTML><HEAD></HEAD><BODY><P>Interface resets and crc errors are almost always physical line related issues. I'd replace the cat5 and maybe reterminate the coax connections.</P></BODY></HTML> Tue, 01 May 2007 14:49:08 GMT https://community.cisco.com/t5/wireless/input-errors-on-fastethernet-1300-bridge/m-p/728579#M190391 sethgarnar 2007-05-01T14:49:08Z Re: Input errors on FastEthernet, 1300 bridge https://community.cisco.com/t5/wireless/input-errors-on-fastethernet-1300-bridge/m-p/728580#M190392 <HTML><HEAD></HEAD><BODY><P>replaced power injector and cable, that seemed to resolve the input errors but now it's getting output errors, very high rate.</P></BODY></HTML> Tue, 29 May 2007 12:27:26 GMT https://community.cisco.com/t5/wireless/input-errors-on-fastethernet-1300-bridge/m-p/728580#M190392 kc 2007-05-29T12:27:26Z