topic Re: Led AP1130 in Wireless https://community.cisco.com/t5/wireless/led-ap1130/m-p/755285#M190450 <HTML><HEAD></HEAD><BODY><P>not sure if this will help, but assuming the ap's are plugged into a cisco switch you have to turn CDP off on the ports you are using. </P><P></P><P>i had a similar problem with a group of 1242's i had on older cisco switches. turned cdp off and it worked fine.</P></BODY></HTML> Thu, 19 Apr 2007 21:28:26 GMT Adam Watts 2007-04-19T21:28:26Z Led AP1130 https://community.cisco.com/t5/wireless/led-ap1130/m-p/755283#M190448 <P>I connect a LAP1131 to power injector and its led status change to amber? what means this? The AP is registered in the wireless lan controllers but its Operational status is Down. I selected the "power injector states" check box. </P> Sat, 03 Jul 2021 20:57:07 GMT https://community.cisco.com/t5/wireless/led-ap1130/m-p/755283#M190448 ricardorojas123 2021-07-03T20:57:07Z Re: Led AP1130 https://community.cisco.com/t5/wireless/led-ap1130/m-p/755284#M190449 <HTML><HEAD></HEAD><BODY><P>not sure if this will help, but assuming the ap's are plugged into a cisco switch you have to turn CDP off on the ports you are using. </P><P></P><P>i had a similar problem with a group of 1242's i had on older cisco switches. turned cdp off and it worked fine.</P></BODY></HTML> Thu, 19 Apr 2007 21:27:45 GMT https://community.cisco.com/t5/wireless/led-ap1130/m-p/755284#M190449 Adam Watts 2007-04-19T21:27:45Z Re: Led AP1130 https://community.cisco.com/t5/wireless/led-ap1130/m-p/755285#M190450 <HTML><HEAD></HEAD><BODY><P>not sure if this will help, but assuming the ap's are plugged into a cisco switch you have to turn CDP off on the ports you are using. </P><P></P><P>i had a similar problem with a group of 1242's i had on older cisco switches. turned cdp off and it worked fine.</P></BODY></HTML> Thu, 19 Apr 2007 21:28:26 GMT https://community.cisco.com/t5/wireless/led-ap1130/m-p/755285#M190450 Adam Watts 2007-04-19T21:28:26Z