topic this document has a good 'how in Wireless

Authenticate wireless users with Active Directory and NPS

John Woods — Mon, 05 Jul 2021 08:56:22 GMT

We currently have a wireless infrastructure consisting of 2702i access points and a 5508 controller. We have a guest (Internet only) SSID and also a private (corporate) SSID. We are currently using PSK for the corporate wireless but I would much rather have users authenticate through Active Directory. I have Googled this and see some people say it is possible using Server 2008 R2 and NPS.

Has anyone ever successfully deployed this solution? If so, I would greatly appreciate information on how to configure this. One key thing to note is that we do have non-domained devices that will still need to authenticate against user accounts in AD.

Thank you in advance,

John

Hi John, You will have some

George Stefanick — Fri, 14 Nov 2014 15:34:20 GMT

Hi John,

You will have some reading to do my friend. I will outline the key components and the process with some links.

802.1X -

You are looking to do 802.1X (EAP). Whereby you leverage a radius server NPS and authenticate users against a database, in this case AD. If you never done this before. Know that you will need to configure the radius side and also the client side.

http://technet.microsoft.com/en-us/library/cc759077(v=ws.10).aspx

NPS -

Configuration

http://technet.microsoft.com/en-us/library/dd283091(v=ws.10).aspx

EAP -

You will have to select an EAP type. The most common and widely supported is EAP-PEAPv0. It supports MsChapV2. I might suggest leading with EAP-PEAPv0.

http://www.networkworld.com/article/2223672/access-control/which-eap-types-do-you-need-for-which-identity-projects.html

WLAN -

You will need to configure your WLAN as 802.1X.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70sol.html

CLEINT -

You will need to configure your clients with PEAP.

https://supportforums.cisco.com/document/68096/peap-authentication-configuration-example-windows-7

Hope this helps ..

this document has a good 'how

Jeffrey Keown — Fri, 14 Nov 2014 15:58:42 GMT

this document has a good 'how to' section on configuring NPS:

http://www.cisco.com/en/US/docs/solutions/SBA/February2013/Cisco_SBA_BN_WirelessLANDeploymentGuide-Feb2013.pdf

page 16

hth

George, thank you for the

John Woods — Sat, 15 Nov 2014 03:36:38 GMT

George, thank you for the detailed reply. I will let you know how it goes.

Thank you,

John