topic Environment variable (ENVAR) failure question in Wireless

Environment variable (ENVAR) failure question

garyrivers — Sat, 03 Jul 2021 20:38:48 GMT

in a 1242 LWAPP, what does

"Environment variable (ENVAR) failure" indicate?

I just ran across this also

ndr_eds — Thu, 10 Mar 2016 16:40:41 GMT

I just ran across this also on an old 1242 in a warehouse. Maybe someone will answer this 9 year old question...

The BOOT environment variable

mohanak — Fri, 11 Mar 2016 02:10:52 GMT

The BOOT environment variable needs to be set to a bootable image, which is failed. So download a new image from cisco.com and upload in access point.

https://software.cisco.com/download/release.html?mdfid=280237322&flowid=7588&softwareid=284180979&release=12.4.25d-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest

For your information 1242 is already EOS : http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-phone-7900-series/end_of_life_notice_c51-726425.html

Thanks Mohanak.

ndr_eds — Wed, 23 Mar 2016 17:18:16 GMT

Thanks Mohanak.