https://community.cisco.com/t5/wireless/continual-coverage-threshold-violation/m-p/649219#M190911 <P></P><P>Hi,</P><P></P><P>I seem to get these messages from an 1130 LW, using a 4400 as the controller. Exactly every 20 minutes for the wholes days. Im around 10 meters away from the AP, and every now and then I get a low signal, then the wireless disconnects and reconnects.</P><P></P><P>AP 'comp-1130', interface '802.11b/g' on Controller '10.*.*.*'. Coverage threshold of 'unknown' violated. Total no of clients is 'unknown' and no of failed clients is 'unknown'. </P><P></P><P>The AP is between two other AP's. The other two have no problems. In the area, there are several 7920's and a couple other laptops that use the AP's continually.</P><P></P><P>Thanks</P> Sat, 03 Jul 2021 20:35:30 GMT gippstafe 2021-07-03T20:35:30Z https://community.cisco.com/t5/wireless/continual-coverage-threshold-violation/m-p/649219#M190911 <P></P><P>Hi,</P><P></P><P>I seem to get these messages from an 1130 LW, using a 4400 as the controller. Exactly every 20 minutes for the wholes days. Im around 10 meters away from the AP, and every now and then I get a low signal, then the wireless disconnects and reconnects.</P><P></P><P>AP 'comp-1130', interface '802.11b/g' on Controller '10.*.*.*'. Coverage threshold of 'unknown' violated. Total no of clients is 'unknown' and no of failed clients is 'unknown'. </P><P></P><P>The AP is between two other AP's. The other two have no problems. In the area, there are several 7920's and a couple other laptops that use the AP's continually.</P><P></P><P>Thanks</P> Sat, 03 Jul 2021 20:35:30 GMT https://community.cisco.com/t5/wireless/continual-coverage-threshold-violation/m-p/649219#M190911 gippstafe 2021-07-03T20:35:30Z