topic Re: WLC Error Code in Wireless

WLC Error Code

huber — Sat, 03 Jul 2021 20:23:18 GMT

Hi,

Has anyone a idea what this Error Codes is?

[ERROR] spam_lrad.c 13693: Received replay error

Thanks for any help

Re: WLC Error Code

magress — Mon, 18 Dec 2006 13:15:08 GMT

It's a statistic message, and is used by the controller to maintain statistics and to send a trap. SPAM is LWAPP communications between the controller and AP. In this case, the error is indicating that there is an error in the payload of a packet from the 802.11 side.

We have seen this error usually associate with Intel client devices. If you have Intel devices please make sure they are running the latest drivers.

-Mark

Re: WLC Error Code

huber — Tue, 19 Dec 2006 09:47:29 GMT

Hi Mark,

Thanks for your reply.

As clients we only have Cisco 7920 with the latest Code 3.0.1 and CallManager 4.2.3 SR1

Have you any idea how this is related to your experience?

regards

ray

Re: WLC Error Code

magress — Wed, 27 Dec 2006 11:46:48 GMT

Hello Ray,

My apologizes for the late response. What version are you running on your WLC's? Can you attach a 'show run'?

Thanks,

Mark

Re: WLC Error Code

huber — Tue, 02 Jan 2007 09:06:38 GMT

Mi Mark,

Im running the latest 4.0.179.11 Code. At the Moment I have 3 Threads open relating to the same installation.

1. http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddd106e

2. http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Wireless%20IP%20Voice%20and%20Video&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddcecde

Perhaps it would give you a better overview.

Attachet the sh run of the Controller.

thanks for your help,

ray

Re: WLC Error Code

magress — Tue, 02 Jan 2007 12:03:40 GMT

Ray,

I looked over the threads and your configuration. The error message you provided is a generic notification message. See some of your other symptons, I strongly suspect issues in your RF. Have you had a site survey done? Any issues with interference? You might want to consider opening a TAC reqest.

Thanks,

Mark

Re: WLC Error Code

huber — Wed, 03 Jan 2007 06:34:06 GMT

hi Mark,

I have done a Site Surveye afterwards, because I thought also a RF Problem. I also looked with a spectrum analyzer if there is somthing which could interfere with the installation. But i looked ok. I think open a TAC Case would be the only solution.

The Errors I have on the Switchport is this also relating to a RF Problem? I think there is a Problem between the Switch and the Controller. The Problem is only with the 3750 Platform.

Thanks

ray