topic here is the configuration you in Wireless

vWLC authentication

Anukalp S — Mon, 05 Jul 2021 07:35:13 GMT

Hello,

I have recently configured vWLC and added a cisco AP. Also configured TACACS to get WLC autheticated through it. I am able to login on WLC through TACACS but i also want WLAN connection too get authenticated through this. So it is possible through TACACS or i need to switch over RADIUS configration.

Pls help..

If you have ACS or ISE server

Sandeep Choudhary — Sat, 29 Mar 2014 16:39:15 GMT

If you have ACS or ISE server then you can do it.

Here is the TACAS config example on WLC:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/91631-uwn-tacacs-config.html

http://rscciew.wordpress.com/2014/01/25/configure-radius-server-on-wlc/

Regards

Dont forget to rate helpful posts

Hi..Thanks for this Info,

Anukalp S — Sun, 30 Mar 2014 09:32:42 GMT

Hi..

Thanks for this Info, but that is not actually what i am looking for. I can login on WLC through TACACS but i want wlan ssid also authnticate through TACACS so my question is that is this possible using TACACS config and if yes then how.

Pls see in attachment & help.

here is the configuration you

kaaftab — Mon, 31 Mar 2014 10:25:12 GMT

here is the configuration you are looking for

https://supportforums.cisco.com/discussion/12158376/vwlc-authentication

http://alessandrobonafini.wordpress.com/2012/11/28/how-to-configure-tacacs-on-cisco-acs-5-2-for-cuwn-part-1-wlc/

and complete guide

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_gettingstarted.html