topic Re: Dot11Radio0 Interface Resets in Wireless https://community.cisco.com/t5/wireless/dot11radio0-interface-resets/m-p/588287#M191573 <HTML><HEAD></HEAD><BODY><P>The issue may be with version of the WLSE. WLSE Radio Management scans will reset the radio periodically. Authentication and re-authentication and renewing IP Addresses (currently set to 1 day) If a client fails to authenticate or is required to re-authenticate, normally due to a connectivity loss or interface resets, they can not aquire an IP Address without re-booting.</P></BODY></HTML> Thu, 17 Aug 2006 18:00:08 GMT wong34539 2006-08-17T18:00:08Z Dot11Radio0 Interface Resets https://community.cisco.com/t5/wireless/dot11radio0-interface-resets/m-p/588286#M191572 <P>We're seeing a lot of 350-series APs (with updated IOS ver 12.2(15)XR2 from VxWorks) with interface resets on the Dot11radio0 interface.</P><P></P><P>Can anyone explain what causes an 'Interface reset' on the Dot11radio0 interface? What happens to wireless clients during that reset period...if Voip call is called dropped?</P><P></P><P>Can anything be done to reduce / eliminate the interface resets? </P> Sun, 04 Jul 2021 19:50:16 GMT https://community.cisco.com/t5/wireless/dot11radio0-interface-resets/m-p/588286#M191572 Steven Juras 2021-07-04T19:50:16Z Re: Dot11Radio0 Interface Resets https://community.cisco.com/t5/wireless/dot11radio0-interface-resets/m-p/588287#M191573 <HTML><HEAD></HEAD><BODY><P>The issue may be with version of the WLSE. WLSE Radio Management scans will reset the radio periodically. Authentication and re-authentication and renewing IP Addresses (currently set to 1 day) If a client fails to authenticate or is required to re-authenticate, normally due to a connectivity loss or interface resets, they can not aquire an IP Address without re-booting.</P></BODY></HTML> Thu, 17 Aug 2006 18:00:08 GMT https://community.cisco.com/t5/wireless/dot11radio0-interface-resets/m-p/588287#M191573 wong34539 2006-08-17T18:00:08Z Re: Dot11Radio0 Interface Resets https://community.cisco.com/t5/wireless/dot11radio0-interface-resets/m-p/588288#M191574 <HTML><HEAD></HEAD><BODY><P>Interesting...thanks for the reply. We're running the latest version of WLSE (2.13??) but older versions of IOS on the APs. </P></BODY></HTML> Thu, 17 Aug 2006 20:30:06 GMT https://community.cisco.com/t5/wireless/dot11radio0-interface-resets/m-p/588288#M191574 Steven Juras 2006-08-17T20:30:06Z