topic Port 80 for Web authentication? in Wireless

Port 80 for Web authentication?

rraineri — Mon, 05 Jul 2021 07:04:59 GMT

Hi,

Is it possible to use port 80 for web authentication instead of port 443?

Re: Port 80 for Web authentication?

Scott Fella — Mon, 03 Feb 2014 20:21:56 GMT

Sure... on the later code versions you can set the WebAuth to use either http or https by disabling WebAuth SecureWeb (http) or enabling it for https.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Re: Port 80 for Web authentication?

rraineri — Mon, 03 Feb 2014 20:56:05 GMT

Thanks for the answer Scot, do you know starting what code is this option available?

Re: Port 80 for Web authentication?

Scott Fella — Mon, 03 Feb 2014 21:07:09 GMT

I believe in v7.2

Sent from Cisco Technical Support iPhone App

Re: Port 80 for Web authentication?

rraineri — Mon, 03 Feb 2014 21:22:03 GMT

Is this possible on Wism1 units also?

Re: Port 80 for Web authentication?

Scott Fella — Mon, 03 Feb 2014 21:26:13 GMT

No it's not since the WiSM 1 can only go up to v7.0.x. You would need to disable https for management if you want to disable https for WebAuth. That is the only workaround for the older code versions.

Sent from Cisco Technical Support iPhone App

Port 80 for Web authentication?

Maciej Waliszko — Thu, 27 Feb 2014 08:16:50 GMT

I am looking for the same feature but for the NGWC controllers based on IOS XE (3850/5760) and I am not able to find it.

Does anyone know if the same thing can be done on these types of new controllers?

I don't believe there is a

Scott Fella — Thu, 13 Mar 2014 01:40:02 GMT

I don't believe there is a setting on the IOS XE for that.