topic 1241 Bridge in Wireless https://community.cisco.com/t5/wireless/1241-bridge/m-p/556338#M191905 <P>Hi,</P><P></P><P>We are testing 2 1241 Access Points in bridge mode. Essentially we want to enable connect two switches using a pair of access points. The switches will have multiple vlans and thus will </P><P>have a trunk to the access point.</P><P></P><P>We have used other bridges in the past </P><P>for this but want to see if it works on </P><P>the Cisco AP's. </P><P></P><P>Does anyone know how this would be accomplished.</P><P></P><P>Regards</P><P></P><P>Miron</P> Sun, 04 Jul 2021 18:56:34 GMT mironduplessis 2021-07-04T18:56:34Z 1241 Bridge https://community.cisco.com/t5/wireless/1241-bridge/m-p/556338#M191905 <P>Hi,</P><P></P><P>We are testing 2 1241 Access Points in bridge mode. Essentially we want to enable connect two switches using a pair of access points. The switches will have multiple vlans and thus will </P><P>have a trunk to the access point.</P><P></P><P>We have used other bridges in the past </P><P>for this but want to see if it works on </P><P>the Cisco AP's. </P><P></P><P>Does anyone know how this would be accomplished.</P><P></P><P>Regards</P><P></P><P>Miron</P> Sun, 04 Jul 2021 18:56:34 GMT https://community.cisco.com/t5/wireless/1241-bridge/m-p/556338#M191905 mironduplessis 2021-07-04T18:56:34Z Re: 1241 Bridge https://community.cisco.com/t5/wireless/1241-bridge/m-p/556339#M191906 <HTML><HEAD></HEAD><BODY><P>For this setup you need to create VLANs on the APs. Read the following document which will give you information on how to configure the VLANs on AP. </P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml</A> </P></BODY></HTML> Wed, 19 Apr 2006 14:12:57 GMT https://community.cisco.com/t5/wireless/1241-bridge/m-p/556339#M191906 pradeepde 2006-04-19T14:12:57Z