topic Re: Mulitpath, Antennas, & Voice in Wireless https://community.cisco.com/t5/wireless/mulitpath-antennas-voice/m-p/581507#M191961 <HTML><HEAD></HEAD><BODY><P>You can use the omnidirectional antennas as diversity antennas. This will provide the best possible result in a high multipath scenario. </P></BODY></HTML> Mon, 03 Apr 2006 16:59:09 GMT mchin345 2006-04-03T16:59:09Z Mulitpath, Antennas, & Voice https://community.cisco.com/t5/wireless/mulitpath-antennas-voice/m-p/581506#M191960 <P>In an environment with high multipath distortion, such as a building that warehouses steel, which diversity antenna will give the best performance in this environment. The AP's are mounted to beams that span the warehouse ceiling 30 feet high. </P><P></P><P>Would 2 regular omni-directional antenna's at -6db gain separated by about 5 inches (802.11g radio) provide diversity? As opposed to buying a specific diversity antenna? Also, this system will be used for voice only. Any help will be greatly appreciated.</P><P></P><P></P> Sun, 04 Jul 2021 18:51:39 GMT https://community.cisco.com/t5/wireless/mulitpath-antennas-voice/m-p/581506#M191960 mcross 2021-07-04T18:51:39Z Re: Mulitpath, Antennas, & Voice https://community.cisco.com/t5/wireless/mulitpath-antennas-voice/m-p/581507#M191961 <HTML><HEAD></HEAD><BODY><P>You can use the omnidirectional antennas as diversity antennas. This will provide the best possible result in a high multipath scenario. </P></BODY></HTML> Mon, 03 Apr 2006 16:59:09 GMT https://community.cisco.com/t5/wireless/mulitpath-antennas-voice/m-p/581507#M191961 mchin345 2006-04-03T16:59:09Z