topic Difference between CLI and web-based GUI in Wireless

Difference between CLI and web-based GUI

rjanakan79 — Sun, 04 Jul 2021 18:14:50 GMT

Hi,

I've been working with Cisco 1310 bridges and 1231 APs. So far, I have used the browser to configure the bridges. I'm wondering is there a need to know the IOS commands to configure them. Does the IOS give more features to configure?. Or knowing IOS has any special advantage over configuring through browser?

I'd appreciate if someone elucidate me on this.

Thank you,

Janakan Rajendran.

Re: Difference between CLI and web-based GUI

stschmidt — Mon, 24 Oct 2005 19:00:58 GMT

For general configuration purposes the WebUI usually is sufficient. There usually are commands that are not in the WebUI that can be enabled via the cli. You can usually get more granularity from the cli than the webUI.

Re: Difference between CLI and web-based GUI

rjanakan79 — Mon, 24 Oct 2005 23:02:10 GMT

Hi,

Thank for your response. Where do I find those special commands? Would you give me an example of such a command that can't be done with webUI?

Thx again,

Janakan Rajendran.