topic Re: Asking about 1300 Typical Throughput (Mbps) in Wireless

Asking about 1300 Typical Throughput (Mbps)

daniel_cheung — Sun, 04 Jul 2021 18:07:58 GMT

Hi,

I would like to ask about BR1300, Please give an idea. What is the max throughtput can reach when using a pair of BR1300 point to point (2km) with DISH antenna (like FTP up/download rate)?

And what i need to tunning on BR1300 to gain this result?

Many Thanks!

Re: Asking about 1300 Typical Throughput (Mbps)

thisisshanky — Fri, 16 Sep 2005 05:27:16 GMT

Use this utility.

http://www.cisco.com/application/vnd.ms-excel/en/us/guest/products/ps5861/c1225/cdccont_0900aecd800f9155.xls

Re: Asking about 1300 Typical Throughput (Mbps)

ulstegner — Tue, 29 Nov 2005 20:55:04 GMT

Hi,

this is depend on :

1. what location : ETSI/FCC

2. what terrain

3. antenna height

4 my be disruption, (interference)

5. cable loss

Note : the real throughput if you connected with 54 MBit/s is about 24 MBit/s (netto)

regards Ulrich

Re: Asking about 1300 Typical Throughput (Mbps)

ipbod1 — Thu, 01 Dec 2005 12:39:32 GMT

Hi Ulstenger,

I found that when i placed my 1310 next to each other I got around 22mbps, but when i put them in place ( in buildings next to each other) this has dropped signifcantly. Am now getting approx 12/13 mbps. Is this normal.

Are there any other settings I can optimize? I have done a carrier bust test and set them both on the cahnnel least congested,though the results of this can change every time you ruin this. Also I found there are upto 22 wlans in my area.

Any feedback would be greatly appreciated.

Re: Asking about 1300 Typical Throughput (Mbps)

dsidley — Fri, 09 Dec 2005 19:39:01 GMT

We have a 2mile link with the identical equipment and get 18Mbps...

That includes 802.1x with WPA (TKIP)

Re: Asking about 1300 Typical Throughput (Mbps)

daniel_cheung — Wed, 29 Mar 2006 06:04:31 GMT

Thx all input!