topic 1310 output errors in Wireless

1310 output errors

g.ayllon — Sun, 04 Jul 2021 18:07:01 GMT

Hi,

I have replaced an older 340 bridge for a new 1310 bridge, now, we are experiencing problems with devices behind the bridge, a parameter reviewing statistics on the new bridge is a high value of output errors in the radio interface. Someone can help me to find a reason for this issue?.

Thanks

Gonzalo

Re: 1310 output errors

Thu, 15 Sep 2005 13:35:30 GMT

When you configure the 802.11g 1300 series radio for best throughput, the 1310 access point/bridge sets all data rates to basic (required). This setting blocks association from 802.11b client devices. The best throughput option appears on the web-browser interface Radio0-802.11G Settings pages and in the speed CLI configuration interface command.

http://www.cisco.com/en/US/products/ps5861/prod_release_note09186a0080343032.html