topic 7920 Channel List in Wireless https://community.cisco.com/t5/wireless/7920-channel-list/m-p/486255#M192527 <P>Hi all,</P><P>is it possible to reduce the 7920 (phoneload 2.0) to scan channel 6 and 11 only ?</P><P></P><P>Background:</P><P>- channel 1 is occupied by an FHSS System (NCR ESL)</P><P>- channel 6 &amp; 11 are free for VoWLAN</P><P>- no WDS enabled yet... </P><P></P><P>Kind regards</P><P>Peter</P> Sun, 04 Jul 2021 17:59:01 GMT pwellmann 2021-07-04T17:59:01Z 7920 Channel List https://community.cisco.com/t5/wireless/7920-channel-list/m-p/486255#M192527 <P>Hi all,</P><P>is it possible to reduce the 7920 (phoneload 2.0) to scan channel 6 and 11 only ?</P><P></P><P>Background:</P><P>- channel 1 is occupied by an FHSS System (NCR ESL)</P><P>- channel 6 &amp; 11 are free for VoWLAN</P><P>- no WDS enabled yet... </P><P></P><P>Kind regards</P><P>Peter</P> Sun, 04 Jul 2021 17:59:01 GMT https://community.cisco.com/t5/wireless/7920-channel-list/m-p/486255#M192527 pwellmann 2021-07-04T17:59:01Z Re: 7920 Channel List https://community.cisco.com/t5/wireless/7920-channel-list/m-p/486256#M192528 <HTML><HEAD></HEAD><BODY><P>The 7920 will learn the channels via active scans. So if you only use 6 and 11 for your voice network (different ssid), then will only scan 6 and 11 more frequently than other channels. Would need to ensure that there is overlapping coverage of these channels so it starts to scan each more frequently after power on. </P><P></P><P>Also 7920 likes non-overlapping channels only as this is how it gives prioritization for scanning since it's power management enabled (i.e. 1,6,11).</P><P></P><P>FYI...FHSS means frequency hopping. So although it may be on 1 now it could change later.</P></BODY></HTML> Tue, 19 Jul 2005 13:52:29 GMT https://community.cisco.com/t5/wireless/7920-channel-list/m-p/486256#M192528 michaelgillespie 2005-07-19T13:52:29Z