topic Re: Hot standby in Wireless https://community.cisco.com/t5/wireless/hot-standby/m-p/338155#M192959 <HTML><HEAD></HEAD><BODY><P>Never mind, it seems only the radio interface mac will work. If you enter the ethernet mac, the AP will run in active mode, with a IAPP status of Init.</P></BODY></HTML> Mon, 21 Feb 2005 17:08:51 GMT thisisshanky 2005-02-21T17:08:51Z Hot standby https://community.cisco.com/t5/wireless/hot-standby/m-p/338154#M192958 <P>For hot standby,</P><P></P><P>Should the mac-address of the active AP be the radio interface mac or the ethernet interface mac ?</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/wireless/ps430/products_installation_and_configuration_guide_chapter09186a0080147d79.html" target="_blank">http://www.cisco.com/en/US/products/hw/wireless/ps430/products_installation_and_configuration_guide_chapter09186a0080147d79.html</A></P><P></P><P></P> Sun, 04 Jul 2021 17:28:41 GMT https://community.cisco.com/t5/wireless/hot-standby/m-p/338154#M192958 thisisshanky 2021-07-04T17:28:41Z Re: Hot standby https://community.cisco.com/t5/wireless/hot-standby/m-p/338155#M192959 <HTML><HEAD></HEAD><BODY><P>Never mind, it seems only the radio interface mac will work. If you enter the ethernet mac, the AP will run in active mode, with a IAPP status of Init.</P></BODY></HTML> Mon, 21 Feb 2005 17:08:51 GMT https://community.cisco.com/t5/wireless/hot-standby/m-p/338155#M192959 thisisshanky 2005-02-21T17:08:51Z