topic Re: what does error=0x00000041 means? in Wireless https://community.cisco.com/t5/wireless/what-does-error-0x00000041-means/m-p/398242#M192986 <HTML><HEAD></HEAD><BODY><P>This can happen if the radio firmware is corrupted, you should try to reset the unit to factory defaults using the reset all command </P></BODY></HTML> Thu, 17 Feb 2005 15:37:43 GMT ebreniz 2005-02-17T15:37:43Z what does error=0x00000041 means? https://community.cisco.com/t5/wireless/what-does-error-0x00000041-means/m-p/398241#M192985 <P>Hi</P><P>We saw these messages on one of the 350 bridge. Does anyone know what it mean?</P><P></P><P>00:32:09 (Warning): Failed to Send Packet on port "awc0" (error=0x00000041)</P><P>00:32:09 (Warning): Failed to Send Packet on port "awc0" (error=0x00000041)</P><P>00:32:09 (Warning): Lost Authentication with Parent</P><P>00:32:09 (Warning): Lost Authentication with Parent</P><P></P> Sun, 04 Jul 2021 17:27:01 GMT https://community.cisco.com/t5/wireless/what-does-error-0x00000041-means/m-p/398241#M192985 zhichao 2021-07-04T17:27:01Z Re: what does error=0x00000041 means? https://community.cisco.com/t5/wireless/what-does-error-0x00000041-means/m-p/398242#M192986 <HTML><HEAD></HEAD><BODY><P>This can happen if the radio firmware is corrupted, you should try to reset the unit to factory defaults using the reset all command </P></BODY></HTML> Thu, 17 Feb 2005 15:37:43 GMT https://community.cisco.com/t5/wireless/what-does-error-0x00000041-means/m-p/398242#M192986 ebreniz 2005-02-17T15:37:43Z