topic Re: Web Authentication Login guests to http in Wireless

Web Authentication Login guests to http

johan oosterwaal — Sun, 04 Jul 2021 06:02:40 GMT

hello everybody

i have a question..

is it possible to change the web authentication login from https://1.1.1.1

to http://1.1.1.1

this is for to avoid the certificate error that you get when logging in to the web page.

Re: Web Authentication Login guests to http

Stephen Rodriguez — Wed, 14 Nov 2012 15:14:30 GMT

If you are running 7.2 or better for your code version it is.

Config network web-auth secureweb disable

If you are below 7.2 you have to completely disable https for mgmt as well

Sent from Cisco Technical Support iPhone App

Re: Web Authentication Login guests to http

johan oosterwaal — Thu, 22 Nov 2012 15:13:56 GMT

Thanks that work!!

Sent from Cisco Technical Support iPhone App

Re: Web Authentication Login guests to http

David Santos — Fri, 23 Nov 2012 13:21:40 GMT

Why don't You see what's happening with the certificates?

Sent from Cisco Technical Support iPad App

Re: Web Authentication Login guests to http

Erik Boss — Mon, 26 Nov 2012 17:41:21 GMT

or just install a valid certificate from Globalsign, Verisign and so on

Good work!

Regards,

Erik

Re: Web Authentication Login guests to http

johan oosterwaal — Thu, 28 Feb 2013 12:18:56 GMT

stephen Rodriguez

you say that if i had a version 7.2 or better i could disable the guest webpage separate from the mgmt ?

Re: Web Authentication Login guests to http

Scott Fella — Thu, 28 Feb 2013 12:40:11 GMT

You can, but on 7.2 it was broke. I know the feature works on v7.3 and 7.4 since I recently tested it. On the lower code versions you would still have to disable https for management to get that to work.

Sent from Cisco Technical Support iPhone App

Re: Web Authentication Login guests to http

Scott Fella — Thu, 28 Feb 2013 13:00:36 GMT

Here is a screen shot

Sent from Cisco Technical Support iPhone App