topic Re: Using 1200AP as Radius Server? in Wireless

Using 1200AP as Radius Server?

vekuhl — Sun, 04 Jul 2021 17:06:36 GMT

Currently we have several 1200ap's deployed using LEAP with only one Cisco ACS. Most of the AP's are in one building with the ACS on the same network. A few remote offices have only 1 ap which has to authenticate back to the central ACS which then has to validate the login credentials back to the local domain controller. Essentialy going roundtrip. Am I correct in understanding that I can setup the 1200 to serve as a local radius server and authenticate directly to the local domain controller and avoid this round about? Any links on how to configure this would be appreciated.

Re: Using 1200AP as Radius Server?

paddyxdoyle — Wed, 27 Oct 2004 17:43:58 GMT

Hi,

You can only use local username and passwords when using a local radius server on an Access point.

See the following for further information

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a9b.html

Paddy