topic WLSM redundancy in Wireless https://community.cisco.com/t5/wireless/wlsm-redundancy/m-p/387781#M193371 <P>Has anyone configured WLSMs in redundant mode, e.g., one WLSM in each core switch? The deployment guide does not talk about how this would work. My best guess is that you configure HSRP under the tunnel interfaces. Can anyone confirm if this is the correct way to do it and it there are any gotchas?</P><P></P><P>Many thanks,</P><P></P><P>Chris</P> Sun, 04 Jul 2021 17:06:01 GMT c.alison 2021-07-04T17:06:01Z WLSM redundancy https://community.cisco.com/t5/wireless/wlsm-redundancy/m-p/387781#M193371 <P>Has anyone configured WLSMs in redundant mode, e.g., one WLSM in each core switch? The deployment guide does not talk about how this would work. My best guess is that you configure HSRP under the tunnel interfaces. Can anyone confirm if this is the correct way to do it and it there are any gotchas?</P><P></P><P>Many thanks,</P><P></P><P>Chris</P> Sun, 04 Jul 2021 17:06:01 GMT https://community.cisco.com/t5/wireless/wlsm-redundancy/m-p/387781#M193371 c.alison 2021-07-04T17:06:01Z Re: WLSM redundancy https://community.cisco.com/t5/wireless/wlsm-redundancy/m-p/387782#M193372 <HTML><HEAD></HEAD><BODY><P>I found this page that explains it:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/partner/products/hw/switches/ps708/prod_module_configuration_guide09186a00802445fd.html#wp54840" target="_blank">http://www.cisco.com/en/US/partner/products/hw/switches/ps708/prod_module_configuration_guide09186a00802445fd.html#wp54840</A></P></BODY></HTML> Fri, 22 Oct 2004 14:30:17 GMT https://community.cisco.com/t5/wireless/wlsm-redundancy/m-p/387782#M193372 c.alison 2004-10-22T14:30:17Z