topic Bridging Question in Wireless https://community.cisco.com/t5/wireless/bridging-question/m-p/293631#M193783 <P>Has anyone ever used a 350 Bridge and connected to a 350 WorkGroup bridge? We have an application where the two buildings are only about 1/8 mile apart and the farend(workgroup bridge end) would have 3-4 computers attached. It is possible to attach these to bridges? Thanks..</P> Sun, 04 Jul 2021 16:40:15 GMT rx33328 2021-07-04T16:40:15Z Bridging Question https://community.cisco.com/t5/wireless/bridging-question/m-p/293631#M193783 <P>Has anyone ever used a 350 Bridge and connected to a 350 WorkGroup bridge? We have an application where the two buildings are only about 1/8 mile apart and the farend(workgroup bridge end) would have 3-4 computers attached. It is possible to attach these to bridges? Thanks..</P> Sun, 04 Jul 2021 16:40:15 GMT https://community.cisco.com/t5/wireless/bridging-question/m-p/293631#M193783 rx33328 2021-07-04T16:40:15Z Re: Bridging Question https://community.cisco.com/t5/wireless/bridging-question/m-p/293632#M193784 <HTML><HEAD></HEAD><BODY><P>From your query I understand you need to set a AP 350 as a repeater. If so you can use the following document for configuration.</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a00801a54fc.html#13728" target="_blank">http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a00801a54fc.html#13728</A></P></BODY></HTML> Wed, 02 Jun 2004 17:55:34 GMT https://community.cisco.com/t5/wireless/bridging-question/m-p/293632#M193784 vmoopeung 2004-06-02T17:55:34Z