topic configuring NTP on AP1100 in Wireless

configuring NTP on AP1100

rouven.heim — Sun, 04 Jul 2021 15:45:38 GMT

Hi!

I try to setup an AP1100 for getting the time from an W2K Server via NTP .

But it will not work. I did the same with an BR350 and same W2K server, this works fine. Any Idea?

Than you,

Rouven

Re: configuring NTP on AP1100

raymong — Mon, 09 Jun 2003 15:46:44 GMT

The AP 1100 does not have a hardware supported clock and can not function as an NTP master clock. Here is a url with more information on configuring NTP for the 1100:

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_installation_and_configuration_guide_chapter09186a0080101c21.html#1036341

Re: configuring NTP on AP1100

rouven.heim — Tue, 10 Jun 2003 11:42:09 GMT

The AP should not function as an NTP master clock. The NTP master clock is a W2K server. The AP should receive the time from the W2K server.