Can't associate

htmltobing — Sun, 04 Jul 2021 15:41:08 GMT

Hi all,

I have problem, I have cisco bridge 350 series, for the first time all working properly, but when i try to restricted the channel 11 than the probelm accur, all wireless client cannot associate, and the bridge still using channel 1 .

But when I see on Bridge that client is associated.

Than I change to the previous setting, but THE PROBLEM STILL THERE.

SOME ONE PLEASE HELLLPPPPPPPP

Re: Can't associate

nparra — Thu, 08 May 2003 12:19:48 GMT

Hi,

If you want that the bridge and client can associate they have be using the same channel.

The bridge has be configured: Root w/clients, and they have be configured with the same SSID.

Verify the bridge and clients configurations If something setting changed when you did the change then adjust

If this don´t work then resett the configuration.

See chapter 10. Managing Firmware andConfigurations.

Section: Downloading, Uploading, and Resetting the Configuration.

good luck,

Norma

topic Can't associate in Wireless

Can't associate

Re: Can't associate